Follow
Georges Ayoub
Georges Ayoub
Professor of manufacturing engineering, University of Michigan Dearborn
Verified email at umich.edu - Homepage
Title
Cited by
Cited by
Year
Modelling large deformation behaviour under loading–unloading of semicrystalline polymers: application to a high density polyethylene
G Ayoub, F Zaïri, M Naït-Abdelaziz, JM Gloaguen
International Journal of Plasticity 26 (3), 329-347, 2010
2542010
Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061
A Dorbane, B Mansoor, G Ayoub, VC Shunmugasamy, A Imad
Materials Science and Engineering: A 651, 720-733, 2016
1352016
Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: experiments and constitutive modelling
G Ayoub, F Zaïri, C Fréderix, JM Gloaguen, M Naït-Abdelaziz, R Seguela, ...
International Journal of Plasticity 27 (4), 492-511, 2011
1312011
A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading
G Ayoub, M Naït-Abdelaziz, F Zaïri, JM Gloaguen, P Charrier
International Journal of Solids and Structures 48 (18), 2458-2466, 2011
1132011
Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber
G Ayoub, F Zaïri, M Naït-Abdelaziz, JM Gloaguen
Journal of the Mechanics and Physics of Solids 59 (2), 473-495, 2011
1062011
A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory
G Ayoub, F Zaïri, M Naït-Abdelaziz, JM Gloaguen, G Kridli
International Journal of Plasticity 54, 19-33, 2014
1022014
Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films
S Belbachir, F Zaïri, G Ayoub, U Maschke, M Naït-Abdelaziz, ...
Journal of the Mechanics and Physics of Solids 58 (2), 241-255, 2010
972010
Effect of strain rate and temperature on fracture of magnesium alloy AZ31B
AK Rodriguez, GA Ayoub, B Mansoor, AA Benzerga
Acta Materialia 112, 194-208, 2016
962016
Relating grain size to the Zener–Hollomon parameter for twin-roll-cast AZ31B alloy refined by friction stir processing
AH Ammouri, G Kridli, G Ayoub, RF Hamade
Journal of Materials Processing Technology 222, 301-306, 2015
922015
Deformation mechanisms in Ti/TiN multilayer under compressive loading
W Yang, G Ayoub, I Salehinia, B Mansoor, H Zbib
Acta Materialia 122, 99-108, 2017
892017
Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: Effects of two-blocks loading and R ratio
G Ayoub, M Naït-Abdelaziz, F Zaïri, JM Gloaguen, P Charrier
Mechanics of materials 52, 87-102, 2012
862012
Effect of UV-aging on the mechanical and fracture behavior of low density polyethylene
AK Rodriguez, B Mansoor, G Ayoub, X Colin, AA Benzerga
Polymer Degradation and Stability 180, 109185, 2020
742020
Multiaxial fatigue life predictors for rubbers: Application of recent developments to a carbon-filled SBR
G Ayoub, M Naït-Abdelaziz, F Zaïri
International Journal of Fatigue 66, 168-176, 2014
702014
Reduction in tension–compression asymmetry via grain refinement and texture design in Mg–3Al–1Zn sheets
E Dogan, I Karaman, G Ayoub, G Kridli
Materials Science and Engineering: A 610, 220-227, 2014
602014
Multiaxial fatigue life prediction of rubber-like materials using the continuum damage mechanics approach
G Ayoub, M Nait-Abdelaziz, F Zaïri, JM Gloaguen
Procedia Engineering 2 (1), 985-993, 2010
592010
Detection and assessment of flaws in friction stir welded joints using ultrasonic guided waves: experimental and finite element analysis
MA Fakih, S Mustapha, J Tarraf, G Ayoub, R Hamade
Mechanical Systems and Signal Processing 101, 516-534, 2018
542018
Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets
A Dorbane, G Ayoub, B Mansoor, RF Hamade, G Kridli, R Shabadi, ...
Materials Science and Engineering: A 649, 190-200, 2016
532016
Multiaxial tension/compression asymmetry of Ti/TiN nano laminates: MD investigation
W Yang, G Ayoub, I Salehinia, B Mansoor, H Zbib
Acta Materialia 135, 348-360, 2017
452017
New developments in fracture of rubbers: Predictive tools and influence of thermal aging
MN Abdelaziz, G Ayoub, X Colin, M Benhassine, M Mouwakeh
International Journal of Solids and Structures 165, 127-136, 2019
442019
Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures
A Dorbane, G Ayoub, B Mansoor, R Hamade, G Kridli, A Imad
Materials Science and Engineering: A 624, 239-249, 2015
442015
The system can't perform the operation now. Try again later.
Articles 1–20